• Tel: +86-510-83209229
    Fax: +86-510-83218366
    Mobile: +86-13616182007
    E-mail: info@wuxisunway.com
    Add: NO.57 A of Yangming Industrial Park,Nanchang Disctrict,Wuxi,Jiangsu,P.R.China
    Whats APP ID: +86-13616182007
    Viber ID: +86-13616182007
High-Speed Cut-To-Length Line

High-Speed Cut-To-Length Line

This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length.


We can also supply the customized machines.

Introduction:
    This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length.

    The high speed cut-to-length line adopts servo length-fixing and pneumatically mechanical shearing to make sure sheet length precision and clean shearing notch.

    The coil strip high speed cut-to-length line (CTL machine) is composed of: coil loading car, single-mandrel decoiler, coil-head guide, press & shoveling equipment, pinch-feeding roller & leveling machine, hole accumulator, side guide, fine leveling & length-fixing machine, pneumatically mechanical shearing machine, delivery belt, piling-up bracket, up-down lifting table, moving-out car, hydraulic system and electric control system.

The high speed CTL machine (coil strip cut-to-length) fit steel coils with thickness: (0.2-2mm, 0.3-3mm, 0.6-4mm, or 1-5mm) and changeable width and length of finished sheets depend on customer's practical need.

Advantages and Characteristics of Coil Strip Cut-to-Length Line:
1. Fast speed and high precision
Line speed can be up to 100m/min, 25-30pcs/min 2000mm Length sheets in average.
Leveling precision: ±1mm/㎡
Sheet length precision: ±0.5mm/m
Sheet diagonal length precision: ±0.5mm/m
2. Thin coils differ in coil weight, when max coil weight is small, usually single mandrel (cantilever) uncoiler for this high-speed cut-to-length line is adopted.
3. To make flat steel sheets, the diameter of leveling rollers should be scientifically proper, we confirm diameter of leveling rollers by actual experiences and engineering calculation.
4. Automatically piling-up bracket can receive finished sheets and automatically pile them up orderly.
5. Hole accumulator between leveling machine and fine leveling, is necessary to protect sheet surface and make sure the simultaneously work of leveling machine DC motor and fine leveling servo motor.

High-Speed Cut-To-Length Line

Detail specification:
Model
 thickness width Length Leveling speed
SW-2 x 1000 0.2-2.0mm 400-1000mm adjustable Max 100m/min
SW-3 x 1250 0.3-3.0mm 500-1250mm adjustable Max 100m/min
SW-4 X 1500 0.6-4mm 500-1500mm adjustable Max 80m/min
SW-5x1600 1-5mm 500-1600mm adjustable Max 80m/min
Note: The data in the form just as reference according to general ranges, we always design and make each line according to each customer's specific requirements, so each customer can buy his own well-content CTL Machine line from us.
 

High-Speed Cut-To-Length Line Layout Drawing





Photos for Reference
Welcome to send your message to us