A. How to adjust the feeding width? The in the feeding guide device, We will make the hand wheels at the feeding device, and We also make the wheels with the numbers than you know how to adjust right and left sides, also We made the rulers on the bedding, you can adjust according to the rulers.

B. How to adjust the thickness and different raw materials for the PPGI, Galvanized coils, Aluminium, Aluzinc?

It is very important to adjust the different thickness. For the feeding area, We will put the air cylinder and the gear connector to adjust the different thickness. For the forming area, We will make the flanges with scales, you know how to adjust by each rings with the bolts.

C. How to make the sheets flat and straightening? When the sheets are curl or bended, normally We will make the straightening device at the last 2-3 stations with 360 dgree heads and some supporting rolls to help it get to the cutter easily.

D. How to make the length or the punching size correctly? Normally We adjusted the length encoder well before shipping. If you moved the encoder sometimes when shipping or loading, then there is some difference between the length you demand or the actual length you need, then you need to modify the encoder wheels ratio, then you make up the length in the touch screen, We will show you the operation videos and the manual, and We can have face to face video talk by whatsapp or wechat or Teams group. We will also send you the installation videos.

E. How to solve the problems if the motor burn or the control box burn if you have the wrong operation? We will send you the new motor or control box as soon as possible to replace it.